Add:No.1 Da Tong Li West Street, Yahu Village, Renhe Town, Baiyun District, Guangzhou, P.R.China
High precision plane grinding and polishing is the use of free granular abrasive on the workpiece surface and the base surface of the grinding disc relative motion, making the workpiece surface very high smoothness and smoothness, the workpiece fixed no strong clamp, vacuum, magnets, only naturally placed on the grinding disc, the base can be suitable for processing any metal and non gold. The material of the workpiece, without the mandatory clamping and the rigid grinding of the general grinding machine, reducing the impact and heat generated by secondary deformation, more conducive to high precision and high finish processing. Even an experienced operator can easily get the best 0.2um flatness and Ra0.02um roughness.
The flatness of the workpiece depends on the flatness of the grinder. With the deepening of the processing field and the increasing demand for precision and efficiency, "WEIANDA" has developed from cast iron plate, synthetic disc, copper plate, pure tin plate, resin disk to the diamond plate, and through various methods to repair the plate to the best of 2um.
The surface roughness depends on the size and shape of abrasive particles and the material of the millstone, as well as the material and hardness of the workpiece.
Grinding with coarse grained abrasives on grinding and workpiece surfaces has large feed rate and high efficiency, but the rough grinding surface is suitable for grinding much more work.
Grinding with medium grain abrasives on grinding and workpiece surfaces has the advantages of fast feed rate, high efficiency and moderate surface roughness, which is suitable for grinding general workpieces.
The abrasive with finer graininess is used to grind the workpiece and the workpiece surface. The grinding quantity is small, the surface finish is good, and the grinding marks are even and fine.
A special material polishing pad or polished cloth is installed on the grinding disc, and the polishing material moves between the polishing pad or the polished cloth to make the workpiece with the same high gloss as the hard polishing.
The surface of the workpiece is high precision and high degree of smoothness like a mirror, by adding a very high density base surface, such as synthetic disk, copper plate, tin plate and resin disk, to the micron diamond abrasive.
Previous: Design Features Of Sink Mould
- How To Make Four Column Hydraulic P...
- How To Determine The Speed Of The H...
- Operation And Maintenance Regulatio...
- Structure Of Annealing Furnace
- How Is The Heating In The Post - El...
- Maintenance And Maintenance Of Anne...
- The Use Of The Polishing Machine An...
- Design Features Of Sink Mould
- The Effect Of Hydraulic Press On In...
- The Method Of Adjusting Speed Of Hy...
- Vietnam Customer Cooperated With Us
- Indian Customer Visited Our Company
- Egypt Customer Was Very Satisfied W...
- Aosvo Invented New Machines
- Indian Customer Decided Visited Our...
- Saudi Arabia Customer Visited Our F...
- India Customer Thinks Highly Of Our...